国产69精品久久久久人妻刘玥-国产69精品久久久久人妻刘玥电影-国产69精品久久久久无码-国产69精品久久久久一区-国产69精品麻豆久久久久-国产69精品一

HOME  >> 
How to correctly use the cone crusher to achieve the effect of improving products?
Source: Number of views: 3620

       At present, cone crusher has become a common crusher equipment. It is widely used in many fields such as mining, crushing of construction materials, road construction, etc. due to its advantages of high output, high proportion of fine materials, easy maintenance, and excellent grain shape.

       In order to further improve the performance of the cone crusher, Chongqing Longjian Industrial Group Co., Ltd. has launched a variety of cone crushers, PYB spring cone crusher series, FPB composite spring cone crusher series, DPH (S) single cylinder hydraulic cone crusher series, HPT multi-cylinder hydraulic cone crusher series and other products have won unanimous praise from users.

       So how should friends of the cone crusher production line manage and use the cone crusher correctly? How to further improve the product effect of cone crusher? Senior editor of Chongqing Longjian Group Co., Ltd. to share with you ——

       1. Run as full as possible

       For the product of cone crusher, if it is "hungry" and "satisfactory" due to factors such as unstable feeding, then the product particle size and product rate will also fluctuate. Half-cavity running cones are not ideal in terms of gradation and needle shape.

Second, the feed should not be too small

For the cone crusher, giving a small amount of raw materials cannot continuously reduce the burden of the cone crusher. On the contrary, too little raw material will also damage the output of the cone crushed product, the particle size is not good, and adversely affect the cone broken bearings.

       3. Keep the parameters of the tight-edge discharge port unchanged

In order to stabilize the output, quality and load of the production line of sand and gravel products, the parameters of the discharge port of the tight side of the cone crusher must be unchanged first. If the product particle size increases unexpectedly, it is easy to cause the final production capacity of the entire production line of the cone crusher.

4. Ensure that the falling point of the feed is aligned with the center point of the feed inlet

     The senior editor of Longjian Group recommends that you use vertical deflectors to guide the falling point of the feed at the center of the cone breaking feed inlet. Once the drop point is eccentric, one side of the crushing chamber is full of material and the other side has no or little material, which will cause adverse impacts such as lower crusher throughput, increased needle-shaped products, and super-large particle size.

      Fifth, ensure uniform feeding

When feeding, it is necessary to avoid the situation where large-diameter stones are concentrated on one side and small-diameter stones are concentrated on the other side, to ensure that the stones are mixed evenly.

       Sixth, the stagnation of buffer silos is minimized

       The buffer silo of the cone crusher is regarded as the "enemy of production", and the equipment and other related equipment also need to be carefully arranged.

       7. Monitor and try to ensure proper speed of crusher

       If the proper drive belt tension is not maintained, the drive maintenance is incorrect, or the drive maintenance is ignored, belt slippage and a drop in the speed of the crusher may occur during work. The throughput of the crusher's stone with a reduced speed has dropped sharply, while the power consumption has increased sharply, the unit energy consumption has increased, and operating costs have increased.

       8. Controlling the fine material content in the feed

       For secondary cone crushing, the fines content in the feed should not exceed 25%; the tertiary cone crushing should not exceed 10%.

       Nine, the feeding height should not be too large

       For small and medium-sized cone crushers, the maximum suitable height for the material to fall from the feeding equipment to the feed inlet is about 0.9 meters. If the feeding height is too large, the stone can easily "rush" into the crushing chamber at high speed, causing impact load on the crusher and adversely affecting it.

      In summary, during the use of the cone crusher, equipment inspection and regular maintenance should be strengthened. Here, the editor of Longjian Group is willing to study and discuss with you. Welcome to call: 400-023-0808.

 

主站蜘蛛池模板: 伊人论坛| 精品人妻无码一区二区三区淑枝| 人成午夜免费视频在线观看| 三级高清| 伦敦金属交易网价| 欧美影院入口| WWW色情成人网站| 欧美日韩一区二区三区视视频| 日本欧美亚洲中文在线观看| 色综合五月| 国产片国产片| 五月天婷婷在线观看高清| _日韩人妻无码一区二区三区| 天天噜夜夜噜| 少妇寂寞偷公乱400章深夜书屋 | 久久久精品2020免费观看| 好爽插到我子宫了高清在线| 99久久国产露脸精品麻豆| 国产欧美日本亚洲精品五区| 中文字幕一卡二卡三卡四卡免费| 色偷偷狠狠色综合网| 亚洲精品午夜一区人人爽| 在线看黄页| 高h全肉图| 美女h动态图| 欧美视频在线观看xxxx| 国产午夜精品AV一区二区麻豆| 国产在线精品一区二区在线看 | 亚洲免费福利在线视频| 日本韩国欧美在线| 伊人蕉久75影院在线播放| 成片一卡三卡四卡免费网站| 狠狠色婷婷综合天天久久丁香 | 少妇把腿扒开让我爽爽视频| 日本一区二区三区免费看| 亚洲色网址| 自拍区偷拍亚图片小说| 免费观看黄色一级片| 精品国产高清毛片A片看| 午夜性色一区二区三区不卡视频 | 真实国产精品视频国产网|